Before My Toolmania WBM16LV milling machine was delivered I already had plans to convert it to a CNC milling machine.
I do have some experience with 3d printing, and I have 2 CNC routers up and running, like the Indymill. So, the conversion of this mill will not be difficult in the Technical sense. But- making the perfect designs for the adapter plates of the Y- and X- axes proved to be a lot more work than I expected.
The column cutter is already equipped with glass scales with digital readout. Furthermore, there is a gas spring mounted on the Z-column so that not all the weight is in the way when moving back and forth. Also an automatic lubrication system for the slides of X, Y and Z-axis will be mounted.)
The electronics will become OpenCNC + wifi + wireless controlbox. I received the kit and will put it together the coming weeks. For now I am going to set the mill up with my all-in one USB-CNC-MDK2 board. I use this for all of my routers and mills to get it set up in first instance since it is very simple and sturdy. And- you can run it instantaniously without any PC or programming, just with the handwheel or from SD card. And from the laptop, of course.
After this all worked well, I also made designs for NEMA direct drive adapters on my Toolmania MiniMill:
Above: Direct drive adapter for the Z-axis
What makes it tricky is the choice to make: Will I replace the spindles with ball bearing spindles or not? Not for the time being, first let’s make everything on CNC and then I’ll see how it goes.